Netgear

Uit arl.nu wiki
Ga naar: navigatie, zoeken

netgear admin url

https://<naam of ip>/admin

Netgear update

hij lijkt niet vanzelf verder te gaan, log aan met ssh, en ga naar:

/var/log/frontview/status.log

LET OP, na een evt. upgrade, kan het zijn dat je moet booten (om de update af te maken, kun je zien in bovenstaande status.log), en dat je daarna SSH weer aan moet zetten:

http://kb.netgear.com/app/answers/detail/a_id/24551

en daar dan:

Enable Root SSH Access

Netgear network reset

http://kb.netgear.com/app/answers/detail/a_id/21100/session/L2F2LzEvdGltZS8xNDQ0MjQ1MzY0L3NpZC9jOTV1TW15bQ%3D%3D

To access the boot menu:
Power off your storage system.
Using a straightened paper clip, press and hold the Reset button.
Press the Power button to power on your system.
Continue to press the Reset button until the Power button LED, USB and backup status LED, 
disk 1 LED, and disk 2 LED illuminate.
Release the Reset button.
Press the Backup button to scroll through boot mode options.
Your system shows the boot mode options using the LEDs, as described in the following table:

Boot Mode
Status Indicator
Description	
Power 1 LED
Disk 1 LED
Disk 2 LED
USB and Backup LED
Normal	Power LED illuminates.	
Factory Default	Disk 1 LED illuminates.	
OS reinstall	Disk 2 LED illuminates.	
Tech Support	USB and Backup status LED illuminates.	
Skip volume Check	Power LED and disk 1 LED illuminates.	
Memory Test	Power LED and disk 2 LED illuminate.	
Disk test	Power LED and USB and backup status LED illuminate	
Legend:
On: Image
Off: Image


Press and release the Reset button to confirm your boot menu selection.
The system boots in the selected boot mode.

I think os-reinstall is the best solution:

OS reinstall. Reinstalls the firmware from the internal flash to the disks. Use the OS reinstall boot mode when 
the system crashes and corrupts some configuration files. OS reinstall boot mode also resets some settings
on your storage system, such as Internet protocol settings and the administrator password, to defaults.

factory default, will lose data!!!!

crashplan install

http://www.shasam.net/blog/2012/3/21/crashplan-on-the-netgear-readynas-x86.html

of

https://community.netgear.com/t5/Backing-up-to-your-ReadyNAS/Crashplan-for-Dummies-aka-Step-by-Step/td-p/865563

feb 2017

i needed after the install, point crashplan to local installed java, /usr/local/bin/java instead of the downloaded with installation
i could not addopt, but making new backup

netgear addons

http://kb.netgear.com/app/answers/detail/a_id/24551

netgear tech support login

als je raar gedrag ziet, enableroot foutmelding, of niet reageren op reboot, dan is waarschijnlijk / root fs erg vol.

op te lossen door:

https://onlyblueatwork.wordpress.com/2012/12/04/netgear-readynas-access-recovery/

zie ook bovenstaand, de backup led dient te branden

netgear crashplan connect

als je wilt verbinden, met de headless netgear nas client:

Rachel-2:CrashPlan arlensen$ diff .ui_info .ui_info_arlnas
1c1
< 4243,<ID1>,127.0.0.1
\ No newline at end of file
---
> 4200,<ID2>,127.0.0.1
Rachel-2:CrashPlan arlensen$ pwd
/Library/Application Support/CrashPlan
Rachel-2:CrashPlan arlensen$ cp -pr .ui_info_arlnas .ui_info
Rachel-2:conf arlensen$ pwd
/Applications/CrashPlan.app/Contents/Resources/Java/conf
Rachel-2:conf arlensen$ diff ui.properties ui.properties_arlnas
3c3
< #servicePort=4243
---
> servicePort=4200
14c14
< #font.tab=
\ No newline at end of file
---
> #font.tab=
Rachel-2:conf arlensen$cp -pr ui.properties_arlnas ui.properties
Rachel-2:CrashPlan arlensen$ ssh -L 4200:localhost:4243 root@arlnas

nu CrashPlan starten, dmv bijvoorbeeld spotlight